SRS SEAT CUSHION AIRBAG ASSEMBLY INSTALLATION

INSTALL REAR SEAT CUSHION ASSEMBLY RH

1. Connect the cable to the negative (-) auxiliary battery terminal.

2. Operate the ottoman switch to move the ottoman to the return position.

3. Disconnect the cable from the negative (-) auxiliary battery terminal.

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. 

   Text in Illustration

   *1	Seat Cover Hook
   *2	Nut
   *3	Rear Seat Cushion Lock Hook
   *4	Rear Hook

   Connect the connector.

5. Attach the rear hook of the rear seat cushion assembly RH to the rear seatback spring assembly RH.

   Note

   Be careful not to damage the vehicle body.

6. Attach the 2 front hooks of the rear seat cushion assembly RH to the the rear No. 1 seat adjuster assembly.

7. Connect the 2 rear seat cushion lock hooks.

8. Connect the seat cushion ottoman part with the 2 nuts.

9. Install the 2 seat cushion cover hooks.

INSTALL BATTERY SERVICE HOLE COVER LH

1. 

   Text in Illustration

   *A	for Standard
   *B	for Ottoman

   Attach the battery service hole cover LH with the clip and fastening tape.

INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)