FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    A01GYT4E01
    Text in Illustration
    *1 Hook (A)
    *2 Hook (B)

    1. Attach the 5 hooks (A).

    2. Push the front passenger airbag assembly to attach the 5 hooks (B).

    3. Install the 2 screws.

  2. INSTALL NO. 2 INSTRUMENT PANEL WIRE

    A01H0EI

    1. Connect the 2 airbag connectors.

      Note


      • When connecting airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    2. Push in the lock to connect the airbag connector.

    3. Attach the clamp to install the No. 2 instrument panel wire to the front passenger airbag assembly.

  3. INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. Install the No. 3 heater to register duct with the 3 screws.

  4. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Install the defroster nozzle assembly with the 3 screws.

  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the claw to install the No. 2 side defroster nozzle duct.

    2. Install the screw.

  6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  7. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. CHECK SRS WARNING LIGHT

    Click here

  9. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI