INSTALL SEAT BELT CONTROL ECU
Install the seat belt control ECU with the 2 nuts.
Connect the 2 connectors.
INSTALL SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman)
Install the module with the 3 bolts.
Connect the connector.
Attach the wire harness clamp.
Attach the 2 claws to connect the air hose connector.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
Install the luggage compartment trim cover assembly LH with the claw and 2 clips.
INSTALL REAR FLOOR FINISH PLATE
Attach the 4 clips to install the rear floor finish plate.
Install the 3 clips.
INSTALL TOOL BOX (w/o Spare Tire)
Install the tool box with the 2 clips.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
| *A | w/o Rear Cooler |
| *B | w/ Rear Cooler |
Attach the 4 claws to install the front luggage compartment trim cover.
Install the 3 clips.
INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)
Attach the 5 clips to install the No. 1 cooler cover.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Connect the connector.
Attach the 2 claws to Install the No. 1 luggage compartment light assembly.
INSTALL DECK TRIM SIDE BOARD RH
| *A | w/ Spare Tire |
| *B | w/o Spare Tire |
w/ Spare Tire:
Install the deck trim side board RH with the clip.
w/o Spare Tire:
Attach the clip to install the deck trim side board RH.
INSTALL ROPE HOOK
Install the 4 rope hooks.
INSTALL ROPE HOOK ASSEMBLY
Install the 4 rope hook assemblies with the 4 bolts.
INSTALL BATTERY SERVICE HOLE COVER LH
| *A | for Standard |
| *B | for Ottoman |
Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
CHECK SRS WARNING LIGHT