PRE-CRASH BRAKE CANCEL SWITCH INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

    A01H1FA

    1. Attach the 2 claws to install the pre-crash system cancel switch assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GYIG

    1. Connect each connector and attach each wire harness clamp.

    2. Attach the 2 claws to connect the DLC3.

    3. Attach the 2 claws to install the No. 1 instrument panel under cover sub-assembly.

    4. Install the 2 screws.