PRE-CRASH BRAKE CANCEL SWITCH REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GYFZ

    1. Remove the 2 screws.

    2. Detach the 2 claws as shown in the illustration and remove the No. 1 instrument panel under cover sub-assembly.

    3. Detach the 2 claws and disconnect the DLC3.

    4. Disconnect each connector and detach each wire harness clamp.

  2. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

    A01H1FA

    1. Detach the 2 claws and remove the pre-crash system cancel switch assembly.