REAR MILLIMETER WAVE RADAR SENSOR INSTALLATION


  1. INSTALL REAR MILLIMETER WAVE RADAR SENSOR ASSEMBLY

    A01GXDAE01

    1. Connect the connector.

    2. Install the rear millimeter wave radar sensor assembly with the 3 nuts. Tighten in the order shown in illustration.

      Torque:
      5.5 N*m  { 55 kgf*cm, 49 in.*lbf }

  2. INSTALL REAR BUMPER ENERGY ABSORBER


    1. Install the rear bumper energy absorber.

  3. INSTALL REAR BUMPER COVER


    1. Connect the No. 3 floor wire connector.

    2. Attach the 14 claws and 4 guides to install the rear bumper cover.

    3. Install the 2 screws.

    4. Install the 6 clips.

    5. Install the 2 screws.

    6. A01GWCM

      Install the rear bumper seal bracket and screw.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

  4. INSTALL UPPER REAR BUMPER COVER LH


    1. Attach the 3 claws to install the upper rear bumper cover LH.

  5. INSTALL UPPER REAR BUMPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. ADJUST REAR MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. Adjust the rear millimeter wave radar sensor Click here.