PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2060

DTC Code DTC Name
B2060 ABS Malfunction

DESCRIPTION

This DTC is output when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU to the seal belt control ECU through the CAN communication line.

When DTC B2060 is detected, ABS system DTCs will also be detected.

DTC Code DTC Detection Condition Trouble Area
B2060 While initial check is running, power switch is ON (IG) and pre-crash safety system is operating, brake system malfunction signal is received from skid control ECU for 1 second

  • Electronically controlled brake system

  • CAN communication system

  • Seat belt control ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)


    1. Using the intelligent tester, enter the following menus: Chassis / ABS/VSC/TRC. Then select "DTC".

    2. Check for DTC.

      Result
      Result Proceed to
      Electronically controlled brake system DTC is not output A
      Electronically controlled brake system DTC is output B

    B

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here

    A

    REPLACE SEAT BELT CONTROL ECU Click here