REAR EVAPORATOR TEMPERATURE SENSOR (w/o Rear Air Conditioning System) REMOVAL


  1. REMOVE REAR COOLING UNIT ASSEMBLY

    Click here

  2. REMOVE DRAIN COOLER HOSE


    1. A01H02Y

      Remove the drain cooler hose.

  3. REMOVE NO. 2 REAR COOLING UNIT DAMPER SERVO SUB-ASSEMBLY


    1. A01GW4I

      Disconnect the connector.

    2. Remove the 3 screws and No. 3 rear cooling unit damper servo sub-assembly.

  4. REMOVE NO. 2 AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


    1. A01H1GU

      Remove the 2 screws and piping parts clamp.

    2. A01GZ1S

      Cut off the 3 cable ties.

    3. A01GXWK

      Remove the packing.

    4. A01H0ZX

      Remove the butyl tape.

    5. A01GZ85

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    6. Remove the No. 2 air conditioning tube and accessory assembly.

    7. Remove the 2 O-rings from the No. 2 air conditioning tube and accessory assembly.

  5. REMOVE REAR COOLING UNIT EXPANSION VALVE


    1. A01H0PK

      Disconnect the connector and detach the clamp.

    2. Remove the rear cooling unit expansion valve.

  6. REMOVE AIR CONDITIONING TUBE ASSEMBLY


    1. A01H22G

      Remove the packing.

    2. Remove the screw.

    3. A01GZU5

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    4. Remove the air conditioning tube assembly.

    5. Remove the 2 O-rings from the air conditioning tube assembly.

  7. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A01GZ27

      Disconnect the connector.

    2. Remove the 3 screws and rear blower with fan motor sub-assembly.

  8. REMOVE NO. 2 WIRING AIR CONDITIONER HARNESS SUB-ASSEMBLY


    1. Cut off the cable tie.

    2. Disconnect the connectors and detach the clamps.

    3. Remove the No. 2 wiring air conditioner harness sub-assembly.

      A01GZ3J

  9. REMOVE REAR EVAPORATOR SUB-ASSEMBLY


    1. A01H0JD

      Remove the packing.

    2. Remove the 6 clips and 8 screws.

      A01GW60

    3. Detach the clamp and remove the rear cooling unit case (Upper).

    4. A01H0PB

      Remove the rear evaporator sub-assembly.

  10. REMOVE NO. 2 COOLER THERMISTOR

    A01GZF1

    1. Remove the No. 2 cooler thermistor.