REAR EVAPORATOR TEMPERATURE SENSOR (w/ Rear Air Conditioning System) REMOVAL


  1. REMOVE REAR COOLING UNIT ASSEMBLY

    Click here

  2. REMOVE DRAIN COOLER HOSE


    1. A01H02Y

      Remove the drain cooler hose.

  3. REMOVE REAR COOLER FILTER


    1. A01GYFG

      Remove the rear cooler filter.

  4. REMOVE SMOKE SENSOR


    1. A01GYE2

      Disconnect the connector.

    2. Remove the 2 screws and smoke sensor.

  5. REMOVE NO. 1 REAR COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for RH Side)


    1. A01GWAW

      Disconnect the connector.

    2. Remove the 2 screws and No. 1 rear cooling unit damper servo sub-assembly.

  6. REMOVE NO. 1 REAR COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for LH Side)


    1. A01GWAG

      Disconnect the connector.

    2. Remove the 2 screws and No. 1 rear cooling unit damper servo sub-assembly.

  7. REMOVE NO. 2 REAR COOLING UNIT DAMPER SERVO SUB-ASSEMBLY


    1. A01GXL0

      Disconnect the connector.

    2. Remove the 3 screws and No. 2 rear cooling unit damper servo sub-assembly.

  8. REMOVE NO. 2 AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


    1. A01GWU1

      Remove the 2 screws and piping parts clamp.

    2. A01GZ1S

      Cut off the 3 cable ties.

    3. A01GXWK

      Remove the packing.

    4. A01H0ZX

      Remove the butyl tape.

    5. A01GZ85

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    6. Remove the No. 2 air conditioning tube and accessory assembly.

    7. Remove the 2 O-rings from the No. 2 air conditioning tube and accessory assembly.

  9. REMOVE REAR COOLING UNIT EXPANSION VALVE


    1. A01H0PK

      Disconnect the connector and detach the clamp.

    2. Remove the rear cooling unit expansion valve.

  10. REMOVE AIR CONDITIONING TUBE ASSEMBLY


    1. A01H22G

      Remove the packing.

    2. Remove the screw.

    3. A01GZU5

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    4. Remove the air conditioning tube assembly.

    5. Remove the 2 O-rings from the air conditioning tube assembly.

  11. REMOVE NO. 3 REAR COOLING UNIT DAMPER SERVO SUB-ASSEMBLY


    1. A01GZT6

      Disconnect the 2 connectors.

    2. Remove the 3 screws and No. 3 rear cooling unit damper servo sub-assembly.

  12. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A01GYHL

      Remove the 3 screws and air duct LH.

    2. A01GXI5

      Remove the 3 screws and air duct RH.

    3. Disconnect the connector.

    4. A01H0UV

      Remove the 3 screws and rear blower with fan motor sub-assembly.

  13. REMOVE NO. 2 WIRING AIR CONDITIONER HARNESS SUB-ASSEMBLY


    1. Cut off the cable tie.

      A01H257

    2. Disconnect the connectors and detach the clamps.

    3. Remove the No. 2 wiring air conditioner harness sub-assembly.

  14. REMOVE REAR EVAPORATOR SUB-ASSEMBLY


    1. A01GY4N

      Remove the packing.

    2. Remove the 6 clips and 8 screws.

      A01GXNU

    3. Detach the clamp and remove the rear cooling unit case (upper).

    4. A01GWLP

      Remove the rear evaporator sub-assembly.

  15. REMOVE NO. 2 COOLER THERMISTOR


    1. A01GY00

      Remove the No. 2 cooler thermistor.