PTC HEATER ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE AIR OUTLET SERVO MOTOR LH (Front A/C Rear Air Flow)

    A01H1H4E01

    1. When reusing the air outlet servo motor LH (front A/C rear air flow):

      Place alignment marks on the moving parts and air conditioning unit as shown in the illustration.

      Text in Illustration
      *1 Alignment Marks
    2. A01GZZ8

      Disconnect the connector.

    3. Remove the 2 screws and air outlet servo motor LH (front A/C rear air flow).

  3. REMOVE QUICK HEATER ASSEMBLY


    1. A01GX5H

      Remove the 3 screws and bracket.

    2. A01H11SE01

      Remove the 2 screws.

    3. Detach the 2 connector clamps and harness clamp and remove the quick heater assembly.