AIR CONDITIONING SYSTEM, Diagnostic DTC:B1458/58

DTC Code DTC Name
B1458/58 Passenger Side Air Outlet Damper Control Servo Motor Circuit

DESCRIPTION

The air mix damper servo (for passenger side front A/C rear air flow) sends pulse signals to inform the air conditioning amplifier of the damper position. The air conditioning amplifier activates the motor (normal, reverse) based on the signals to move the air mix damper (for passenger side front A/C rear air flow) to any position. As a result, the amount of air that has passed through the evaporator and is passing through the heater core is adjusted, and the temperature of the air blowing toward the rear passenger side is controlled.

Tech Tips

Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or damper is mechanically locked.

DTC Code DTC Detection Condition Trouble Area
B1458/58 Air mix damper position sensor value does not change even if air conditioning amplifier operates air mix servo motor

  • Air mix servo motor (for passenger side front A/C rear air flow)

  • Air conditioning harness

  • Air conditioning amplifier

WIRING DIAGRAM

A01H0AAE52

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1458/58 is not output A
      DTC B1458/58 is output B
      DTC B1458/58 and B1497/97 are output C

    B

    READ VALUE USING INTELLIGENT TESTER (AIR MIX SERVO MOTOR (for Passenger Side Front A/C Rear Air Flow)) Click here

    C

    GO TO DTC B1497/97 Click here

    A

    USE SIMULATION METHOD TO CHECK Click here

  2. READ VALUE USING INTELLIGENT TESTER (AIR MIX SERVO MOTOR (for Passenger Side Front A/C Rear Air Flow))


    1. Use the Data List to check if the servo motor is functioning properly.

      Air conditioner
      Tester Display Measurement Item / Range Normal Condition Diagnostic Note
      HOT A/M Servo Targ PLS(P)

      Passenger side front A/C rear air flow air mix servo motor target pulse /

      for LHD Min.: 43, Max.: 128

      for RHD Min.: 18, Max.: 103

      for LHD:


      • MAX COOL: 128 (pulse)

      • MAX HOT: 43 (pulse)

      for RHD:


      • MAX COOL: 18 (pulse)

      • MAX HOT: 103 (pulse)

      		 -
      OK
      The display is as specified in the normal condition.

    2. Visually inspect the air mix servo motor (for passenger side front A/C rear air flow).


      1. Visually inspect whether the air mix servo motor (for passenger side front A/C rear air flow) operates.

        OK
        The air mix servo motor (for passenger side front A/C rear air flow) operates.
        Result
        Result Proceed to
        The Data List value changes and the air mix servo motor (for passenger side front A/C rear air flow) operates (When troubleshooting according to the DTC output) A
        The Data List value changes and the air mix servo motor (for passenger side front A/C rear air flow) operates (When troubleshooting according to Problem Symptoms Table) B
        The Data List value does not change and the air mix servo motor (for passenger side front A/C rear air flow) does not operate C
        The Data List value changes, but the air mix servo motor (for passenger side front A/C rear air flow) does not operate D

    B

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    C

    REPLACE AIR CONDITIONING AMPLIFIER Click here

    D

    CHECK AIR MIX SERVO MOTOR (for Passenger Side Front A/C Rear Air Flow) Click here

    A

  3. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC B1458/58 is not output.

    NG

    REPLACE AIR CONDITIONING AMPLIFIER Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here

  4. CHECK AIR MIX SERVO MOTOR (for Passenger Side Front A/C Rear Air Flow)


    1. Replace the air mix servo motor Click here.

      Tech Tips

      Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

    2. Clear the DTCs Click here.

    3. Check for DTCs Click here.

      OK
      DTC B1458/58 is not output.

    NG

    CHECK AIR CONDITIONING HARNESS Click here

    OK

    END (AIR MIX SERVO MOTOR (for Passenger Side Front A/C Rear Air Flow) IS DEFECTIVE)

  5. CHECK AIR CONDITIONING HARNESS


    1. Replace the air conditioning harness Click here.

    2. Clear the DTCs Click here.

    3. Check for DTCs Click here.

      OK
      DTC B1458/58 is not output.

    NG

    REPLACE AIR CONDITIONING AMPLIFIER Click here

    OK

    END (AIR CONDITIONING HARNESS IS FAULTY)