POWER STEERING ECU INSTALLATION


  1. INSTALL POWER STEERING ECU


    1. A01H0Z5

      Attach the claw and install the ECU with the 4 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Connect the connector C to the ECU.

      A01GXICE04

    3. Connect the ECU connectors A and B and securely lock the connectors.

  2. INSTALL NO. 1 INVERTER RESERVOIR BRACKET


    1. A01H29H

      Install the bracket with the 2 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }
    2. A01H1N7

      Install the reservoir with the 2 nuts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  3. INSTALL AIR CLEANER ASSEMBLY RH


    1. A01GYYNE01

      Align the air cleaner cases 2 holes to the 2 stud bolts and attach the air cleaner case RH to the boss. Then install the 2 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Install the air cleaner filter element to the air cleaner case RH.

    3. A01GZS4

      Install the air cleaner cap RH and secure the 2 clamps.

    4. Connect the mass air flow meter connector.

  4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. Install the inlet cover with the 5 clips.

  5. INSTALL ENGINE ROOM SIDE COVER


    1. Install the engine room side cover RH with the 5 clips.

  6. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  11. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION

    Click here