HEATED STEERING WHEEL CONTROLLER INSTALLATION


  1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. Install the heater control assembly with the 2 screws and connect the connector clamp.

  2. INSTALL STEERING WHEEL BOSS COVER LOWER


    1. w/o Shift Paddle Switch:

      Attach the 2 guide pins, 2 claws and 2 screws to install the steering wheel lower cover.

    2. w/ Shift Paddle Switch:

      Attach the 2 claws and a new 4 screws to install the steering wheel lower cover.

  3. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY


    1. A01GX8Z

      Connect the connector and install the cruise control main switch assembly.

    2. Install the 2 screws.

  4. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. Install the steering pad switch with the 4 screws and connect the 6 guide pins.

    2. Connect the connector clamp.

  5. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  6. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

  7. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  11. CHECK SRS WARNING LIGHT

    Click here

  12. PERFORM INITIALIZATION

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.