MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL

Tech Tips


  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are for the LHD.


  1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

    Click here

  2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolts.

    3. A01H1M7E08
      Text in Illustration
      *1 Screw Extractor

      Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A01GZGA

      Disconnect the ECU connector.

    2. Remove the 2 screws and ECU.