POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch ON (IG).

    3. Turn the tester on.

    4. Enter the following menus:

      Select: Body / Tilt & Telescopic / DTC.

    5. Read the DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch ON (IG).

    3. Turn the tester on.

    4. Enter the following menus:

      Select: Body / Tilt & Telescopic / DTC.

    5. Erase the DTCs.