POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch ON (IG).

    3. Turn the tester on.

    4. Enter the following menus:

      Select: Body / Tilt & Telescopic / Utility / Customize.

    5. Select the setting by referring to the table below.

      Tilt & Telesco
      Display Default Contents Setting
      Autoaway / Return function ON ON/OFF of the auto away / return function ON/OFF