POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM Tilt and Telescopic Manual Switch Circuit

DESCRIPTION

The signals generated by operating the manual switch are sent to the multiplex tilt and telescopic ECU through the communication bus.

INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING INTELLIGENT TESTER (TILT AND TELESCOPIC MANUAL SWITCH)

   
   

   1. Use the Data List to check if the tilt and telescopic manual switch is functioning properly.

      Combination Switch:

      Tester Display	Measurement Item/Range	Normal Condition	Normal Condition
      Telesco Short Switch	Telescopic SHORT switch status/OFF or ON	OFF: Telescopic short is not activated by manual switch ON: Telescopic short is activated by manual switch	-
      Telesco Long Switch	Telescopic LONG switch status/OFF or ON	OFF: Telescopic long is not activated by manual switch ON: Telescopic long is activated by manual switch	-
      Tilt Down Switch	Tilt DOWN switch status/OFF or ON	OFF: Tilt down is not activated by manual switch ON: Tilt down is activated by manual switch	-
      Tilt Up Switch	Tilt UP switch status/OFF or ON	OFF: Tilt up is not activated by manual switch ON: Tilt up is activated by manual switch	-

      Result

      Result	Proceed to
      "ON" is displayed on the tester screen when each switch is turned on. "OFF" is displayed on the tester screen when each switch is turned off.	A
      "ON" is not displayed on the tester screen when each switch is turned on. "OFF" is not displayed on the tester screen when each switch is turned off.	B

   
   

   B

   REPLACE WINDSHIELD WIPER SWITCH Click here

   A

   REPLACE TILT AND TELESCOPIC MANUAL SWITCH Click here