Click here

BRAKE CONTROL POWER SUPPLY INSTALLATION

Click here
Click here Click here
Note:

While the battery is connected, even if the power switch is OFF, the brake control system activates when the brake pedal is depressed or the door courtesy switch turns on. Therefore during servicing of the brake system components, do not operate the brake pedal or open/close the doors while the battery is connected.

Click here
  1. Click here

    INSTALL NO. 1 BRAKE CONTROL POWER SUPPLY BRACKET


    1. A01GZSU

      Install the 2 brackets with the 4 bolts.

      8.5 N*m 87 kgf*cm 75 in.*lbf
      Note:

      Do not drop the brake control power supply. If the brake control power supply has been dropped, replace the brake control power supply with a new one.

  2. Click here

    INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY


    1. A01H0HS

      Connect the connector to the brake control power supply.

    2. Install the brake control power supply with the 2 nuts.

      8.0 N*m 82 kgf*cm 71 in.*lbf
  3. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

    (Click here)

  4. Click here

    CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  5. Click here

    INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02

      Attach the battery service hole cover LH with the clip and fastening tape.

      Table 1. Text in Illustration
      *A for Standard
      *B for Ottoman
  6. Click here

    INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  7. Click here

    INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  8. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

  9. Click here

    CHECK AND CLEAR DTC

    (Click here)