DOOR CONTROL RECEIVER INSTALLATION

INSTALL DOOR CONTROL RECEIVER
1. Install the door control receiver with the nut.
2. Connect the connector.
  
  Note
  
  When replacing or inspecting the door control receiver and wire harness, do not change the position or length of the wire harness. If the wire harness is too close to the door control receiver, entry and wireless function performance may be affected.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
1. Install the luggage compartment trim cover assembly RH with the claw and 2 clips.
INSTALL REAR FLOOR FINISH PLATE
1. Attach the 4 clips to install the rear floor finish plate.
2. Install the 3 clips.
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
1. Text in Illustration
  
  *A w/o Rear Cooler
  
  *B w/ Rear Cooler
  
  Attach the 4 claws to install the front luggage compartment trim cover.
2. Install the 3 clips.
INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)
1. Attach the 5 clips to install the No. 1 cooler cover.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws to Install the No. 1 luggage compartment light assembly.

Text in Illustration
*A	w/o Rear Cooler
*B	w/ Rear Cooler

INSTALL DECK TRIM SIDE BOARD RH

Text in Illustration
*A	w/ Spare Tire
*B	w/o Spare Tire

w/ Spare Tire:

INSTALL ROPE HOOK
1. Install the 4 rope hooks.
INSTALL ROPE HOOK ASSEMBLY
1. Install the 4 rope hook assemblies with the 4 bolts.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

Text in Illustration
*A	for Standard
*B	for Ottoman