TIRE PRESSURE WARNING INITIATOR DRIVER (for RHD) INSTALLATION


  1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER


    1. Install the tire pressure monitor initiator driver with the 2 nuts.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

    2. Install the tire pressure monitor initiator driver with the bolt and nut.

    3. Connect the connectors.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. CONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  8. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here