TIRE PRESSURE WARNING INITIATOR (for Front Side) INSTALLATION


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL FRONT TIRE PRESSURE MONITOR INITIATOR


    1. Install the front tire pressure monitor initiator with the nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the connector.

  3. INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with the 15 screws and 6 clips.

  4. INSTALL FRONT FENDER WHEEL OPENING MOULDING RH


    1. Attach the clip to install the moulding.

    2. Install the 5 screws.

  5. INSTALL FRONT FENDER MAIN SEAL RH


    1. A01H1YF

      Push in the clip labeled A in the illustration in the upward direction of the vehicle and install the front fender main seal RH with the 3 clips.

  6. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here