TIRE PRESSURE WARNING INITIATOR (for Front Side) REMOVAL


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT FENDER MAIN SEAL RH


    1. A01H1YFE01

      Loosen the clip labeled A in the illustration, and then remove the 3 clips and front fender main seal RH.

      Tech Tips

      Clip A cannot be removed.

  3. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH


    1. A01GWND

      Remove the 5 screws.

    2. Detach the clip and remove the moulding.

  4. REMOVE FRONT FENDER LINER RH


    1. A01H0AB

      Remove the 15 screws, 6 clips and front fender liner RH.

  5. REMOVE FRONT TIRE PRESSURE MONITOR INITIATOR


    1. A01GZ18

      Disconnect the connector.

    2. Remove the nut and front tire pressure monitor initiator.