FRONT SHOCK ABSORBER DISPOSAL


  1. DISPOSE OF FRONT PNEUMATIC SHOCK ABSORBER WITH CYLINDER ASSEMBLY LH


    1. A01GYP6E01

      Fully extend the front shock absorber rod.

    2. Using a drill, make a hole in the cylinder somewhere between A and B shown in the illustration to discharge the gas inside.

      CAUTION:

      Be careful as the cylinder is a high-pressure gas type which is at a higher pressure than normal shock absorbers. Also be careful with high temperatures as the cylinder's pressure becomes even higher.

      Note

      The gas is colorless, odorless and harmless.