Click here

ABSORBER CONTROL ACTUATOR (for Rear Side) REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

Click here
  1. Click here

    REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    (Click here)

  2. Click here

    REMOVE REAR SHOCK ABSORBER CAP LH


    1. A01GWY2

      Remove the 3 nuts and shock absorber cap.

    2. Disconnect the connector from the absorber control actuator.

    3. Disconnect the absorber cap from the wire harness.

  3. Click here

    REMOVE ABSORBER CONTROL ACTUATOR


    1. A01GZQNE01

      Turn the absorber control actuator counterclockwise approximately 40° to remove it.

      Note:

      • Do not turn the actuator more than 40°.

      • Do not drop the absorber control actuator. If it is dropped, replace it with a new one.