ABSORBER CONTROL ACTUATOR (for Rear Side) INSPECTION


  1. INSPECT ABSORBER CONTROL ACTUATOR


    1. A01GWDLE02

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 (B+) - 3 (GND) Always 12.0 to 12.8 Ω
      2 (A+) - 3 (GND) Always
      4 (B-) - 3 (GND) Always
      5 (A-) - 3 (GND) Always

  2. CHECK ABSORBER CONTROL ACTUATOR OPERATION


    1. Check the absorber control actuator operation Click here.