ABSORBER CONTROL ACTUATOR (for Front Side) REMOVAL

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. A01GWZN

      for LHD:

      Remove the 5 clips and engine room side cover LH.

    2. A01GXEIE01

      for RHD:

      Remove the 5 clips and engine room side cover LH.

      Note

      Remove the clip labeled A by turning it to prevent the engine room side cover LH and bracket from being damaged.

      Tech Tips

      The clip labeled A cannot be removed from the engine room side cover LH.

  2. REMOVE FRONT SHOCK ABSORBER CAP LH


    1. A01GWC5

      Remove the 3 nuts and shock absorber cap.

    2. Disconnect the connector from the absorber control actuator.

    3. Disconnect the absorber cap from the wire harness.

  3. REMOVE ABSORBER CONTROL ACTUATOR


    1. A01GYZBE01

      Turn the absorber control actuator counterclockwise 40° to remove it from the front pneumatic cylinder.

      Note


      • Do not turn the actuator more than 40°.

      • Do not drop the absorber control actuator. If it is dropped, replace it with a new one.