FRONT STABILIZER BAR REMOVAL


  1. REMOVE FRONT CENTER FLOOR COVER


    1. A01GYNV

      Remove the 3 screws, 2 bolts, clip and front center floor cover.

  2. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01H1Z8

      Remove the 4 screws, 2 clips and No. 2 engine under cover.

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A01H0ML

      Remove the 5 screws and front wheel opening extension pad LH.

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A01H0ML

      Remove the 5 screws and front wheel opening extension pad LH.

  5. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01GYE9

      Remove the 13 screws, 7 clips and No. 1 engine under cover.

  6. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR


    1. A01H26P

      Remove the 9 bolts and front lower suspension member protector.

  7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01H0X2

      Remove the 2 nuts and front stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

    A01GYUZ

    1. Remove the bolt and wire harness bracket.

    2. A01H0RH

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

  10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH


    1. A01GWMR

      Remove the bolt and disconnect the water with motor and bracket pump bracket.

    2. A01GZLU

      Remove the 2 bolts and the front No. 1 stabilizer bracket RH from the front frame assembly.

  11. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the vehicle.

  12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.