HEIGHT CONTROL SENSOR (for Rear LH) REMOVAL

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. Disconnect the connector.

    2. A01GYBJE01

      Place matchmarks on the height control sensor link and bracket.

    3. Remove the nut and disconnect the height control sensor link from the bracket.

    4. A01GXVR

      Remove the 2 bolts and height control sensor from the rear suspension member.

      Note

      Do not drop the height control sensor. If it is dropped, replace it with a new one.

  2. REMOVE LOAD SENSING VALVE SENSOR BRACKET LH


    1. Remove the bolt and bracket from the toe control link.