HEIGHT CONTROL COMPRESSOR INSTALLATION


  1. INSTALL HEIGHT CONTROL COMPRESSOR


    1. A01H18R

      Install the 3 bushes and bracket to the height control compressor with the 3 bolts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

    2. Push the connector into the housing until a clicking sound is heard.

    3. Attach the 3 clamps.

    4. A01H0EN

      Install the height control compressor with the bolt and 2 nuts.

      Torque:
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }

    5. Connect the height control tube (Type 2) Click here.

    6. Connect the height control filter to the bumper reinforcement.

    7. A01H054

      Connect the 2 connectors and attach the 2 clamps.

    8. A01GXEX

      Install the fender liner with the 3 screws.

  2. INSPECT FOR AIR LEAK

    Click here

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. INSTALL FRONT WHEEL RH

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }