ACTIVE STABILIZER SUSPENSION SYSTEM, Diagnostic DTC:C1942

DTC Code DTC Name
C1942 Malfunction in Signal from Steering Sensor to Front Active Stabilizer Control ECU

DESCRIPTION

If the front active stabilizer control ECU receives a steering sensor malfunction signal, DTC C1942 is output. The steering sensor is diagnosed by the skid control ECU and steering control ECU. If electronically controlled brake system and Variable Gear Ratio Steering (VGRS) system related DTCs are output, perform a diagnosis for those DTCs. If no electronically controlled brake or VGRS system DTCs are output, there may be a malfunction in the front active stabilizer control ECU.

DTC Code Detection Condition Trouble Area
C1942 Malfunction signal from steering sensor is input to front active stabilizer control ECU

  • Electronically controlled brake system

  • VGRS system

  • Front active stabilizer control ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM AND VGRS SYSTEM)


    1. Turn the power switch OFF.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the power switch ON (READY) and the tester ON.

    4. Check that no electronically controlled brake system DTCs are output Click here, and that no VGRS system DTCs are output Click here.

      Result
      Result Proceed to
      DTC is not output A
      Electronically controlled brake system DTC is output B
      VGRS system DTC is output C

    B

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

    C

    GO TO VGRS SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

    A

    REPLACE FRONT ACTIVE STABILIZER CONTROL ECU ASSEMBLY Click here