DESCRIPTION
If a malfunction in the suspension control ECU is detected, DTC C1781 is output.
| DTC No. | Detection Condition | Trouble Area |
|---|---|---|
| C1781 | Suspension control ECU malfunction is detected | Suspension control ECU |
INSPECTION PROCEDURE
Note
Before performing troubleshooting, inspect the connectors of related circuits.
If the suspension control ECU or height control sensor is replaced, the vehicle height offset calibration must be performed Click here.
PROCEDURE
CHECK DTC
Clear the DTC Click here.
Perform a road test.
Check for DTC Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (for LHD) | B |
| DTC is output (for RHD) | C |
| B |
|
REPLACE SUSPENSION CONTROL ECU Click here |
| C |
|
REPLACE SUSPENSION CONTROL ECU Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here