FRONT DIFFERENTIAL CARRIER ASSEMBLY INSTALLATION


  1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY


    1. A01H1TL

      Support the front differential carrier assembly with a jack and temporarily install it to the oil pan with the 4 bolts.

      CAUTION:

      As the front differential carrier assembly is very heavy, securely support it with the jack.

    2. A01GZMAE02
      Text in Illustration
      *1 Front Differential Carrier Retainer Sub-assembly
      *2 Oil Pan Sub-assembly

      Align the front differential carrier retainer sub-assembly and oil pan so that their ends are aligned and tighten the 4 bolts to install the front differential carrier assembly.

      Torque:
      81 N*m  { 826 kgf*cm, 60 ft.*lbf }

  2. INSTALL ENGINE ASSEMBLY TO VEHICLE


    1. Remove the engine from the engine stand and then install it to the vehicle Click here.

  3. ADD FRONT DIFFERENTIAL OIL


    1. for Front Differential:


      1. A01H1DIE01

        Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole.

        Note


        • Too much or too little oil will lead to differential problems.

        • After changing the oil, drive the vehicle and then check the oil level again.

        Oil type
        Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent.
        Capacity
        0.7 to 0.8 liters (0.74 to 0.84 US qts., 0.62 to 0.70 Imp. qts.)
      2. A01H27B

        Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque:
        39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    2. for Rear Differential:


      1. A01GYOJE01

        Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.

        Note


        • Too much or too little oil will lead to differential problems.

        • After changing the oil, drive the vehicle and then check the oil level again.

        Oil type
        Toyota Genuine Differential Gear Oil LX 75W-85 GL-5 or equivalent
        Capacity
        1.3 to 1.4 liters (1.38 to 1.47 US qts., 1.15 to 1.23 Imp. qts.)
      2. A01H1J4

        Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque:
        49 N*m  { 500 kgf*cm, 36 ft.*lbf }