REAR DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A01GWB9

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. Check the boots for damage.

    5. A01GX48E01

      Check that the 2 joint boots are not stretched or contracted when the drive shaft is at the standard length.

      Length (A)
      Item Length
      for LH Side 698.9 mm (2.29 ft.)
      for RH Side 744.9 mm (2.44 ft.)