OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT CENTER FLOOR COVER (w/ Cover)


    1. A01GYNV

      Remove the 3 screws, 2 bolts, clip and front center floor cover.

  2. DRAIN TRANSMISSION FLUID


    1. A01H012

      Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  3. REMOVE TRANSMISSION OIL PAN SUB-ASSEMBLY


    1. A01H116

      Remove the 6 bolts, oil pan and gasket from the transmission.

    2. Remove the 2 transmission oil cleaner magnets from the oil pan.


      1. Collect any steel chips with the removed magnets. Carefully look at the foreign objects and particles in the pan and on the magnets to guess the type of wear which might be found in the transmission.

        Steel (magnetic): bearing, gear and clutch plate wear

        Brass (non-magnetic): bush wear

  4. REMOVE OIL STRAINER ASSEMBLY


    1. A01H1ZB

      Remove the 3 bolts and oil strainer from the valve body.

    2. A01GYM0E01

      Remove the O-ring from the oil strainer.

  5. REMOVE OIL PRESSURE SWITCH


    1. Remove the oil pressure switch (PB1).


      1. A01GZX2

        Disconnect the oil pressure switch connector.

        Note

        When disconnecting the oil pressure switch connector, do not bend the terminals.

      2. A01GYNCE01

        Remove the oil pressure switch (PB1) from the valve body.

    2. Remove the oil pressure switch (PB2).


      1. A01H03A

        Disconnect the oil pressure switch connector.

        Note

        When disconnecting the oil pressure switch connector, do not bend the terminals.

      2. A01H0FZE01

        Remove the oil pressure switch (PB2) from the valve body.

    3. Remove the oil pressure switch (PB3).


      1. A01GXSO

        Disconnect the oil pressure switch connector.

        Note

        When disconnecting the oil pressure switch connector, do not bend the terminals.

      2. A01GY67E01

        Remove the oil pressure switch (PB3) from the valve body.

  6. REMOVE OIL COOLER TUBE


    1. A01H20D

      Remove the bolt and oil cooler tube clamp.

    2. Remove the oil cooler tube from the valve body.