Click here

COMBINATION SWITCH REMOVAL

Click here
Click here Click here
Tip:

  • Use the procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

  2. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. Pull the front part of the instrument panel finish panel end LH to detach the 6 clips.

    2. Pull the instrument panel finish panel end LH to detach 3 clips and remove the instrument panel finish panel end LH.

  3. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Tip:

    Use the same procedure described for the LH side.

  4. Click here

    REMOVE NO. 3 BOX PANEL


    1. Detach the 4 claws and remove the No. 3 box panel.

  5. Click here

    REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Apply protective tape as shown in the illustration.

      Table 1. Text in Illustration
      *1 Protective Tape

    2. Move the shift lever to N.

    3. Remove the 2 screws.

    4. Detach the 6 clips and remove the upper rear console panel sub-assembly.

    5. Disconnect each connector and detach each wire harness clamp.

  6. Click here

    REMOVE SHIFT POSITION INDICATOR


    1. A01GXZH

      Remove the 2 screws and detach the 3 hooks. Then remove the shift position indicator from the rear upper console panel sub-assembly.

  7. Click here

    REMOVE COMBINATION SWITCH


    1. A01GYTZ

      Detach the 4 claws and remove the combination switch from the rear upper console panel sub-assembly.