TRANSMISSION WIRE REMOVAL


  1. REMOVE FRONT CENTER FLOOR COVER (w/ Cover)


    1. A01GYNV

      Remove the 3 screws, 2 bolts, clip and front center floor cover.

  2. DISCONNECT OXYGEN SENSOR CONNECTOR (for Bank 1 Sensor 2)


    1. A01GXQL

      Disconnect the sensor connector.

    2. A01GXHK

      Remove the bolt, and disconnect the sensor connector bracket.

  3. REMOVE OIL STRAINER ASSEMBLY

    Click here

  4. REMOVE TRANSMISSION WIRE


    1. A01GWRR

      Remove the bolt, lock plate and ATF temperature sensor.

    2. Disconnect the 3 oil pressure switch connectors.

      Note

      When disconnecting the oil pressure switch connectors, do not bend the terminals.

    3. Disconnect the 3 connectors from the solenoid valves.

    4. A01H0CZ

      Disconnect the wire connector.

    5. A01GY5H

      Using a union nut wrench (10 mm), remove the bolt.

    6. Pull out the transmission wire.