SHIFT LOCK SYSTEM INSPECTION


  1. INSPECT SHIFT LOCK SOLENOID


    1. A01GXJQE01

      Measure the resistance according to the value in the table below.

      Tech Tips

      Disconnect the solenoid connector.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 (SLS-) - 4 (SLS+) Always 104 to 126 Ω

      If the result is not as specified, replace the transmission floor shift assembly.

    2. A01GXJQE02

      Measure the resistance according to the values in the table below.

      Tech Tips

      Disconnect the solenoid connector.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 (P+) - 2 (P-) Parking position switch pushed 10 kΩ or higher
      1 (P+) - 2 (P-) Parking position switch released Below 1 Ω

      If the result is not as specified, replace the transmission floor shift assembly.