SERVICE PLUG GRIP INSTALLATION


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Be sure to wear insulated gloves.


    1. Wear insulated gloves and insert the service plug grip.

    2. Turn the lever of the service plug grip 90° and slide the service plug grip downward until a click sound is heard.

      A01H263E02

  2. INSTALL SERVICE PLUG COVER


    1. Install the service plug cover with the 4 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  3. INSTALL REAR SEAT LOWER CONSOLE BOX COVER (for 4-Passenger with Ottoman)


    1. Attach the 2 hooks and 4 claws to install the rear seat lower console box cover.

  4. INSTALL ARMREST DOOR CAP (except 4-Passenger with Ottoman)


    1. Attach the 2 hooks and 6 claws to install the armrest door cap.

  5. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI