BATTERY BLOWER RELAY ON-VEHICLE INSPECTION


  1. INSPECT BATTERY BLOWER RELAY


    1. Measure the resistance according to the value(s) in the table below.

      A01GZX6E03
      Standard Resistance (BATT FAN1)
      Tester Connection Condition Specified Condition
      LG-1 - LD-3 Battery voltage is not applied between terminals LH-1 - LD-14 10 kΩ or higher
      LG-1 - LD-3 Battery voltage is applied between terminals LH-1 - LD-14 Below 1 Ω
      Standard Resistance (BATT FAN2)
      Tester Connection Condition Specified Condition
      LG-1 - LA-41 Battery voltage is not applied between terminals LH-1 - LD-14 10 kΩ or higher
      LG-1 - LA-41 Battery voltage is applied between terminals LH-1 - LD-14 Below 1 Ω

      If the resistance is not as specified, replace the luggage room junction block.