ACCELERATOR PEDAL ROD INSTALLATION


  1. INSTALL ACCELERATOR PEDAL


    1. A01GWJPE02
      Text in Illustration
      *1 Accelerator Pedal
      *2 Accelerator Pedal Support Bracket
      *3 Spring
      A01GZUB Push
      A01H2AH Front of Vehicle

      Engage the 3 claws and install a new accelerator pedal.

      Note

      Securely insert a new accelerator pedal into the accelerator pedal support bracket.

  2. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shocks to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If it is applied, the accelerator pedal sensor assembly may not move smoothly.


    1. Connect the tip of the accelerator pedal sensor to the bracket.

    2. Install the accelerator pedal sensor with the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the accelerator pedal sensor connector.