ACCELERATOR PEDAL ROD REMOVAL


  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shocks to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If it is applied, the accelerator pedal sensor assembly may not move smoothly.


    1. A01GWK6E02
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor connector.

    2. Remove the 3 nuts and accelerator pedal sensor.

  2. REMOVE ACCELERATOR PEDAL


    1. A01H1ZKE02
      Text in Illustration
      *1 Accelerator Pedal
      *2 Accelerator Pedal Support Bracket
      *3 Spring
      A01GYOB Wiggle
      A01GZUB Pull
      A01H2AH Front of Vehicle

      Disengage the 3 claws and remove the accelerator pedal.

      Tech Tips

      While wiggling the tip of the accelerator pedal to the left and right, lift the accelerator pedal upwards and remove it from the bracket.