DESCRIPTION
Refer to the description for DTC P0A78-266 Click here.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0C76 | 523 | Inverter voltage (VH) sensor offset malfunction | Inverter with converter assembly |
Tech Tips
When the power switch is turned off, the MG ECU applies current to MG2 in a way that does not generate torque in order to discharge the residual voltage in the inverter. When the hybrid system is normal, the VH value is almost 0 V after discharge. This DTC will be stored if the VH value is more than the specified value after discharge.
INSPECTION PROCEDURE
PROCEDURE
CHECK DTC OUTPUT (HV)
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
Check if DTCs are output.
| Result | |||||||
|---|---|---|---|---|---|---|---|
|
| DTC No. | Relevant Diagnosis |
|---|---|
| P0A1A-151, 155, 156, 200, 201, 658, 659, 791, 792, 793 | Generator Control Module |
| P0A1B-163, 164, 168, 192, 193, 511, 512, 661, 786, 788, 794, 795, 796 | Drive Motor "A" Control Module |
| P0A3F-243 | Drive Motor "A" Position Sensor Circuit |
| P0A40-500 | Drive Motor "A" Position Sensor Circuit Range / Performance |
| P0A41-245 | Drive Motor "A" Position Sensor Circuit Low |
| P0A4B-253 | Generator Position Sensor Circuit |
| P0A4C-513 | Generator Position Sensor Circuit Range / Performance |
| P0A4D-255 | Generator Position Sensor Circuit Low |
| P0A78-113, 121, 266, 267, 279, 282, 284, 286, 287, 306, 503, 504, 505, 506 | Drive Motor "A" Inverter Performance |
| P0A7A-122, 322, 324, 325, 344, 517, 518 | Generator Inverter Performance |
| P0A90-509 | Drive Motor "A" Performance |
| P0A92-521 | Hybrid Generator Performance |
| P0A94-442 | DC / DC Converter Performance |
| P0ADC-226 | Hybrid Battery Positive Contactor Control Circuit High |
| P0AE0-228 | Hybrid Battery Negative Contactor Control Circuit High |
| P3240-443 | DC/DC Converter Control Circuit |
| B |
|
REPLACE INVERTER WITH CONVERTER ASSEMBLY Click here |
| C |
|
GO TO DTC CHART Click here |
| A |
|
REPLACE INVERTER WITH CONVERTER ASSEMBLY Click here