OIL PRESSURE SWITCH ON-VEHICLE INSPECTION


  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Remove the No. 1 engine under cover Click here.

    2. Disconnect the oil pressure switch connector.

    3. A01GYQTE02

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 - Body ground Engine stopped Below 1 Ω
      Engine idling 10 kΩ or higher

      If the result is not as specified, replace the oil pressure switch.

      Tech Tips

      Put the engine in inspection mode Click here.

    4. Connect the oil pressure switch connector.

    5. Install the No. 1 engine under cover Click here.