COOLING FAN RELAY ON-VEHICLE INSPECTION


  1. REMOVE COOLING FAN RELAY (FAN NO. 1)


    1. Remove the engine room No. 5 relay box cover.

    2. Remove the relay from the engine room No. 5 relay block.

  2. INSPECT COOLING FAN RELAY


    1. A01GXZAE37

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 - 5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      When battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

  3. INSTALL COOLING FAN RELAY