COOLING FAN ECU INSTALLATION


  1. INSTALL COOLING FAN ECU


    1. Install the cooling fan ECU with the 2 screws.

      Torque:
      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

    2. Connect the 3 connectors.

  2. INSTALL NO. 1 AIR CLEANER INLET


    1. A01GYPCE01

      Align the holes with the connection areas labeled A, and attach the No. 1 air cleaner inlet.

    2. Install the No. 1 air cleaner inlet with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GWDEE01

      Attach the 4 clips labeled B.

      Note


      • Make sure the clips are attached securely.

      • Attaching the clips forcefully or hitting the top of the clips may damage them.

    2. Install the air cleaner inlet cover sub-assembly with the 5 clips labeled A.

  4. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A01GZ6XE01

      After sliding the V-bank cover sub-assembly from the vehicle front to the rear to attach the 2 clips labeled A, attach the 4 clips labeled B and install the V-bank cover sub-assembly.

      CAUTION:


      • Make sure the clips are attached securely.

      • Attaching the clips forcefully or hitting the top of the clips may damage them.