AIR CLEANER AND HOSE REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01GZ6XE01

      While using both hands, lift the rear side of the V-bank cover sub-assembly upwards to detach the 4 clips labeled B. Slide the V-bank cover sub-assembly towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GWDEE01

      Remove the 5 clips labeled A.

    2. Lift up the air cleaner inlet cover sub-assembly to detach the 4 clips labeled B, and remove the air cleaner inlet cover sub-assembly.

  3. REMOVE NO. 1 AIR CLEANER INLET


    1. A01GY2C

      Remove the 2 bolts.

    2. A01H12BE01

      Hold the No. 1 air cleaner inlet by the protrusions labeled A and B, and detach the connections.

    3. Rotate the No. 1 air cleaner inlet as shown in the illustration to detach the protrusion labeled C.

    4. Hold the No. 1 air cleaner inlet by the protrusions labeled D and E, and detach the connections.

    5. Rotate the No. 1 air cleaner inlet as shown in the illustration to detach the protrusion labeled F.

  4. REMOVE INTAKE AIR CONNECTOR PIPE

    A01GYHY

    1. Disconnect the No. 1 ventilation hose and No. 2 ventilation hose from the intake air connector pipe.

    2. Using a clip remover, detach the 2 wire harness clamps.

    3. Loosen the 3 hose clamps, and remove the intake air connector pipe.

  5. REMOVE AIR CLEANER ASSEMBLY LH


    1. A01H1MY

      Disconnect the mass air flow meter connector.

    2. Release the 2 clamps and remove the air cleaner cap LH.

    3. Remove the air cleaner filter element from the air cleaner case LH.

    4. A01GY5BE01

      Remove the 2 nuts and detach the air cleaner case LH from the boss.

  6. REMOVE AIR CLEANER ASSEMBLY RH


    1. A01GZS4

      Disconnect the mass air flow meter connector.

    2. Release the 2 clamps and remove the air cleaner cap RH.

    3. Remove the air cleaner filter element from the air cleaner case RH.

    4. A01GYYNE01

      Remove the 2 nuts and detach the air cleaner case RH from the boss.