PURGE VALVE INSTALLATION


  1. INSTALL PURGE VSV


    1. A01GZRZ

      Install the purge VSV with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Connect the 2 purge line hoses to the purge VSV.

    3. Connect the purge VSV connector.

  2. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A01GZ6XE01

      After sliding the V-bank cover sub-assembly from the vehicle front to the rear to attach the 2 clips labeled A, attach the 4 clips labeled B and install the V-bank cover sub-assembly.

      CAUTION:


      • Make sure the clips are attached securely.

      • Attaching the clips forcefully or hitting the top of the clips may damage them.