EXHAUST MANIFOLD REMOVAL

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.


  1. REMOVE ENGINE AND TRANSMISSION

    Click here

  2. REMOVE FRONT FRAME ASSEMBLY


    1. A01GY1I

      Disconnect the heater wire connector and detach the 2 clips.

    2. A01H00VE01

      Remove the 4 nuts and front frame assembly.

  3. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A01H2BZE01

      Remove the engine oil level dipstick.

    2. Remove the bolt and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01GXPZ

      Remove the 3 bolts and heat insulator.

  5. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01GZUW

      Remove the 3 bolts and heat insulator.

  6. REMOVE FRONT ENGINE MOUNTING INSULATOR


    1. A01GXWYE01

      Remove the 2 nuts, 2 spacers and 2 front engine mounting insulators.

  7. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH


    1. A01GWWY

      Remove the 5 bolts and front No. 1 engine mounting bracket RH.

  8. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    1. A01GYCZ

      Remove the 5 bolts and front No. 1 engine mounting bracket LH.

  9. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01GZ2P

      Disconnect the air fuel ratio sensor connector.

    2. A01H236

      Remove the 8 nuts and exhaust manifold RH.

    3. Remove the gasket.

  10. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01GWJZ

      Disconnect the air fuel ratio sensor connector.

    2. A01H1ES

      Remove the 8 nuts and exhaust manifold LH.

    3. Remove the gasket.

  11. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A01H0IOE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

      SST
      09224-00010

  12. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)


    1. A01GWDGE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

      SST
      09224-00010