INTAKE AIR CONTROL VALVE ACTUATOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01GZ6XE01

      While using both hands, lift the rear side of the V-bank cover sub-assembly upwards to detach the 4 clips labeled B. Slide the V-bank cover sub-assembly towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

    A01H0CW

    1. Disconnect the intake air control valve actuator connector.

    2. Remove the nut, and disconnect the actuator rod.

      Note

      When loosening the nut, hold the actuator rod in place so that it does not move.

    3. Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.