FUEL PRESSURE REGULATOR REASSEMBLY


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01GZR0E02

      Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel pressure regulator.

    2. A01GZ3IE01

      Install the fuel pressure regulator to the fuel filter.

    3. Attach the 2 claws of the fuel filter and install the cap.

      Note


      • Make sure the O-rings are not cut or pinched during the installation.

      • Attach the claws securely.

    4. A01GZHM

      Connect the fuel pump connector to the fuel pump.

  2. INSTALL JET PUMP


    1. A01H20LE01

      Apply gasoline to a new O-ring and install it to the jet pump.

    2. A01H1MJ

      Install the jet pump to the sub-tank as shown in the illustration.

  3. INSTALL FUEL FILTER

    A01GYSX

    1. Install the fuel filter to the sub-tank and attach the 2 claws.

  4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. Install the spring to the fuel suction plate shaft.

    2. Install the fuel suction plate to the sub-tank.

    3. A01GXJWE01

      Install a new E-ring.

    4. A01GWTB

      Connect the fuel pump connector to the fuel suction plate.

  5. INSTALL FUEL SENDER GAUGE ASSEMBLY

    A01H1BO

    1. Set the fuel sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

    2. Connect the fuel sender gauge connector to the fuel suction plate.

      Note

      Do not touch the resistance plate or contacts of the fuel sender gauge assembly.